Shikhar Angle Grinder 1 can grind metal and cut tile, stucco, and pavers, rout out mortar, and also they can sand, polish, and sharpen. An angle grinder, also known as a side grinder or disc grinder, kis a handheld power tool used for grinding(abrasive cutting)and polishing. Although developed originally as tools for rigid abrasive discs, the availability of an interchangeable power source has encouraged their use with a wide variety of cutters and attachments.
Angle grinders can be powered by an electric motor or compressed air. The motor drives a geared head at a right-angle on which is mounted an abrasive disc or a thinner cut-off disc, either of which can be replaced when worn. Angle grinders typically have an adjustable guard and a side-handle for two-handed operation. Certain angle grinders, depending on their speed range, can be used as sanders, employing a sanding disc with a backing pad or disc. The backing system is typically made of hard plastic, phenolic resin, or medium-hard rubber depending on the amount of flexibility desired. Angle grinders are standard equipment in metal fabrication shops and on construction sites. They are also common in machine shops, along with die grinders and bench grinders.
|No-load speed||11,000 rpm|
|Grinding spindle thread||M 10|
|Switch||ON/OFF Switch at rear|
TOTAL VIBRATION VALUES (Surface Grinding (Roughing))
|Vibration emission value ah||8.5 m/s²|
|Uncertainty K||2 m/s²|
TOTAL VIBRATION VALUES (Sanding with Sanding Sheet)
|Vibration emission value ah||3 m/s²|
|Uncertainty K||1.5 m/s²|
ANGLE GRINDER 1 FUNCTIONS
Best work results with constant speed. Thanks to electronic regulation of speed even under load.
Comfortable working. Thanks to low vibration by adding rubber mounting padding to the handles.
Outstanding user protection. Thanks to anti rotation protective gaurd-stands firm even if the disc breaks.
Prevents autonomous restart of the tool after power blackout . Only through new, conscious activation, the tool will be ready to use.
Reduces the hazard of sudden tool reactions in binding conditions. Thanks to automatic shutdown of the tool.
Starts softly as the load and torque of the motor are temporarily reduced during start up.
Long lifetime of the tool as the tool shuts off in case of extreme overload situation.