Shikhar Rotary Hammer is used for doweling, which means repetitive drilling of large rebar anchor holes and drilling through holes in concrete and masonry walls. It is chiefly used for drilling in hard materials. It also includes a hammer function. The power usage of this rotary hammer is 500watt, and it has an SDS-plus chuck. Likewise, the load speed goes from 0-1000rpm, whereas the impact of joules is 1.5J. Its drilling capacity for steel is 13mm, for wood is 3mm, and for the concrete is 20mm.

Rotary hammers can be used for “doweling” (repetitive drilling of large rebar anchor holes), and drilling through-holes in concrete and masonry walls. The hammering action helps break up the masonry so that it can be removed by the drill bit’s flutes. Apart from their main function of drilling concrete, the rotary action can be switched off, and use is made of just the percussive force. Chisel and point accessories are used for small chipping jobs.

Worn masonry drill bit Rotary hammers have such force that the usual masonry bits are no longer adequate. Their smooth shanks would be pounded loose from the tool’s chuck in a few seconds. Rotary hammers require special bits that lock into the rotary hammer and continue spinning while smashing away.



Rated Power500 W
Frequency50 – 60 Hz
No-load speed, 1st gear0 – 1000 rpm
Voltage220 – 240V
Impact Joules1.5J
Chuck capacitySDS-Plus
Tool dimensions (width)73 mm
Tool dimensions (length)342 mm
Tool dimensions (height)210 mm


Drilling diameter in wood*3 mm
Drilling diameter in steel*13 mm
Drilling diameter in concrete*20 mm


Soft Grip

Comfortable handling of the tool

Speed Selection

Best work results with speed pre selection for applications requiring material specific speed

Forward/ Reverse

Forward/ Reverse Rotation for inserting and removing screws.

Wood working

The professional power tool for wood working from Shikhar